Fiat TL 90 (DT) vs New Holland TL 100 (A)

4 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the TL 90 (DT) and the TL 100 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

4 material differences · 12 fields identical or within 5%, which is not counted as material

Fiat TL 90 (DT) and New Holland TL 100 (A), field by field
Field	TL 90 (DT)	TL 100 (A)	Gap
Engine
Engine power, claimed claimed	83.9 hp	93.7 hp	+12% TL 100 (A)
Engine declared	New Holland-Iveco 8045.25	Iveco 8045.25 K	differs
Displacement declared	3.91 L	3.91 L	—
Maximum torque declared	215 lb·ft · 292 N·m	245 lb·ft · 332 N·m	+14% TL 100 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift at ends declared	7,385 lb · 3,350 kg	8,554 lb · 3,880 kg	+16% TL 100 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/540E/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,315 lb · 4,225 kg	8,300 lb · 3,765 kg	+12% TL 90 (DT)
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	174.4 in · 4,430 mm	174.4 in · 4,430 mm	—
Width declared	79.1 in · 2,009 mm	79.1 in · 2,009 mm	—
Height declared	100.4 in · 2,550 mm	100.4 in · 2,550 mm	—
Ground clearance declared	17.3 in · 440 mm	17.3 in · 440 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	12.0 ft · 3.65 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source