Fiat TL 80 (DT) vs VALMET 665

12 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the TL 80 (DT) and the 665 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat TL 80 (DT) and VALMET 665, field by field
Field	TL 80 (DT)	665	Gap
Engine
Engine power, claimed claimed	74.0 hp	78.9 hp	+7% 665
Engine declared	New Holland-Iveco 8045.05 R	VALMET 420 D	differs
Displacement declared	3.91 L	4.40 L	+13% 665
Maximum torque declared	188 lb·ft · 255 N·m	214 lb·ft · 290 N·m	+14% 665
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	13.8 gpm · 52.4 L/min	+15% TL 80 (DT)
Pressure declared	2,103 psi · 145 bar	2,901 psi · 200 bar	+38% 665
Three-point lift at ends declared	7,385 lb · 3,350 kg	5,688 lb · 2,580 kg	+30% TL 80 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	7,231 lb · 3,280 kg	+27% TL 80 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	94.1 in · 2,390 mm	—
Length declared	168.5 in · 4,280 mm	157.5 in · 4,000 mm	+7% TL 80 (DT)
Width declared	78.9 in · 2,005 mm	79.9 in · 2,030 mm	—
Height declared	97.4 in · 2,475 mm	101.2 in · 2,570 mm	—
Ground clearance declared	15.0 in · 380 mm	18.1 in · 460 mm	+21% 665
Turning radius, braked declared	11.8 ft · 3.60 m	15.7 ft · 4.80 m	+33% 665
Fuel tank declared	121.5 qt · 115.0 L	77.1 qt · 73.0 L	+58% TL 80 (DT)

Source

Source