Fiat TL 80 (DT) vs New Holland TL 80 (A)
1 material differences · fewer than 12
Which should you choose?
Read our verdict on the TL 80 (DT) and the TL 80 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
1 material differences · 17 fields identical or within 5%, which is not counted as material
| Field | TL 80 (DT) | TL 80 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74.0 hp | — |
| Engine declared | New Holland-Iveco 8045.05 R | Iveco 8045.05 R | differs |
| Displacement declared | 3.91 L | 3.91 L | — |
| Maximum torque declared | 188 lb·ft · 255 N·m | 188 lb·ft · 255 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Hydraulics & hitch | |||
| Pump flow declared | 15.9 gpm · 60.0 L/min | 15.9 gpm · 60.0 L/min | — |
| Pressure declared | 2,103 psi · 145 bar | 2,103 psi · 145 bar | — |
| Three-point lift at ends declared | 7,385 lb · 3,350 kg | 7,385 lb · 3,350 kg | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/540E/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,149 lb · 4,150 kg | 9,149 lb · 4,150 kg | — |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | 11,464 lb · 5,200 kg | — |
| Wheelbase declared | 92.2 in · 2,342 mm | 92.2 in · 2,342 mm | — |
| Length declared | 168.5 in · 4,280 mm | 168.5 in · 4,280 mm | — |
| Width declared | 78.9 in · 2,005 mm | 78.9 in · 2,005 mm | — |
| Height declared | 97.4 in · 2,475 mm | 97.4 in · 2,475 mm | — |
| Ground clearance declared | 15.0 in · 380 mm | 15.0 in · 380 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 11.3 ft · 3.45 m | — |
| Fuel tank declared | 121.5 qt · 115.0 L | 121.5 qt · 115.0 L | — |
Fiat TL 80 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri TL80”
New Holland TL 80 (A) sources
Source
- Source: Traktorenlexikon, “New Holland TL80”
- Source: Traktorenlexikon, “New Holland 5635”