9 material differences · fewer than 12
Tractor oneFiat TL 80 (DT)1998–2004No measured PTO figureTractor twoMassey Ferguson MF 5410 A2011–2014No measured PTO figure
Which should you choose?
Read our verdict on the TL 80 (DT) and the MF 5410 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | TL 80 (DT) | MF 5410 A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 74 hp | — |
| Engine declared | New Holland-Iveco 8045.05 R | Perkins 1104 D-44 T | differs |
| Displacement declared | 3.91 L | 4.40 L | +13% MF 5410 A |
| Maximum torque declared | 188 lb·ft · 255 N·m | 229 lb·ft · 310 N·m | +22% MF 5410 A |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 15.9 gpm · 60.0 L/min | — | — |
| Pressure declared | 2,103 psi · 145 bar | — | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,149 lb · 4,150 kg | 8,378 lb · 3,800 kg | +9% TL 80 (DT) |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | 18,739 lb · 8,500 kg | +63% MF 5410 A |
| Wheelbase declared | 92.2 in · 2,342 mm | 97.0 in · 2,464 mm | — |
| Length declared | 168.5 in · 4,280 mm | 166.2 in · 4,221 mm | — |
| Width declared | 78.9–102.8 in · 2,005–2,610 mm | 60.4–80.1 in · 1,533–2,034 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 15.4 in · 390 mm | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 121.5 qt · 115.0 L | 137.4 qt · 130.0 L | +13% MF 5410 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat TL 80 (DT) sources
- Source: Traktorenlexikon, “Fiatagri TL80”
Massey Ferguson MF 5410 A sources
- Source: Traktorenlexikon, “Massey Ferguson MF 5410”