9 material differences · fewer than 12

Tractor oneFiat TL 80 (DT)1998–2004No measured PTO figureTractor twoMassey Ferguson MF 4235 (A)1997–2001No measured PTO figure

Which should you choose?

Read our verdict on the TL 80 (DT) and the MF 4235 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat TL 80 (DT) and Massey Ferguson MF 4235 (A), field by field
Field	TL 80 (DT)	MF 4235 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	New Holland-Iveco 8045.05 R	Perkins 4.41	differs
Displacement declared	3.91 L	4.08 L	—
Maximum torque declared	188 lb·ft · 255 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal operated, dry and air cooled single disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.9 gpm · 60.0 L/min	—	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift, at the coupling points declared	7,385 lb · 3,350 kg	6,856 lb · 3,110 kg	+8% TL 80 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	7,915 lb · 3,590 kg	+16% TL 80 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	15,432 lb · 7,000 kg	+35% MF 4235 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	168.5 in · 4,280 mm	157.9 in · 4,010 mm	+7% TL 80 (DT)
Width declared	78.9–102.8 in · 2,005–2,610 mm	78.3–102.0 in · 1,990–2,590 mm	—
Height, over the cab declared	97.4 in · 2,475 mm	103.7 in · 2,635 mm	+6% MF 4235 (A)
Ground clearance declared	15.0 in · 380 mm	11.4 in · 290 mm	+31% TL 80 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	196.5 qt · 186.0 L	+62% MF 4235 (A)

Source

Source