8 material differences · fewer than 12

Tractor oneFiat TL 100 (DT)1998–2004No measured PTO figureTractor twoNew Holland 7635 (A)1996–1998No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the 7635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 10 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and New Holland 7635 (A), field by field
Field	TL 100 (DT)	7635 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	Iveco 8045.25 K	differs
Displacement declared	3.91 L	3.91 L	—
Maximum torque declared	245 lb·ft · 332 N·m	209 lb·ft · 284 N·m	+17% TL 100 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	15.9 gpm · 60.0 L/min	—
Pressure declared	2,103 psi · 145 bar	2,103–2,466 psi · 145–170 bar	differs
Three-point lift, at the coupling points declared	8,554 lb · 3,880 kg	9,259 lb · 4,200 kg	+8% 7635 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/540E/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	7,496 lb · 3,400 kg	+28% TL 100 (DT)
Maximum permissible mass declared	13,228 lb · 6,000 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	174.4 in · 4,430 mm	157.5 in · 4,000 mm	+11% TL 100 (DT)
Width declared	79.1–105.7 in · 2,009–2,684 mm	79.5–105.7 in · 2,020–2,685 mm	—
Height, over the cab declared	100.4 in · 2,550 mm	100.4 in · 2,550 mm	—
Ground clearance declared	17.3 in · 440 mm	19.7 in · 500 mm	+14% 7635 (A)
Turning radius, braked declared	12.0 ft · 3.65 m	13.9 ft · 4.25 m	+16% 7635 (A)
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source