Fiat TL 100 (DT) vs Massey Ferguson MF 2625

14 material differences

Tractor one

1998–2004

No measured PTO figure

Tractor two

1985–1986

No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the MF 2625 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and Massey Ferguson MF 2625, field by field
Field	TL 100 (DT)	MF 2625	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	Perkins A 6.354-4	differs
Displacement declared	3.91 L	5.80 L	+48% MF 2625
Maximum torque declared	245 lb·ft · 332 N·m	269 lb·ft · 365 N·m	+10% MF 2625
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	—	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift at ends declared	8,554 lb · 3,880 kg	12,081 lb · 5,480 kg	+41% MF 2625
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	12,015 lb · 5,450 kg	+25% MF 2625
Maximum permissible mass declared	13,228 lb · 6,000 kg	16,535 lb · 7,500 kg	+25% MF 2625
Wheelbase declared	92.2 in · 2,342 mm	107.3 in · 2,726 mm	+16% MF 2625
Length declared	174.4 in · 4,430 mm	200.0 in · 5,080 mm	+15% MF 2625
Width declared	79.1 in · 2,009 mm	91.3 in · 2,320 mm	+15% MF 2625
Height declared	100.4 in · 2,550 mm	113.4 in · 2,880 mm	+13% MF 2625
Ground clearance declared	17.3 in · 440 mm	17.7 in · 450 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	16.1 ft · 4.90 m	+34% MF 2625
Fuel tank declared	121.5 qt · 115.0 L	225.1 qt · 213.0 L	+85% MF 2625

Source

Source