Fiat TL 100 (DT) vs Massey Ferguson MF 6255 (A)

10 material differences · fewer than 12

Tractor one

1998–2004

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the MF 6255 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and Massey Ferguson MF 6255 (A), field by field
Field	TL 100 (DT)	MF 6255 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	Perkins 1004.40 TWG	differs
Displacement declared	3.91 L	3.99 L	—
Maximum torque declared	245 lb·ft · 332 N·m	253 lb·ft · 343 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	—	Pedal operated hydraulic VALEO multi-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	25.3 gpm · 95.7 L/min	+60% MF 6255 (A)
Pressure declared	2,103 psi · 145 bar	3,336 psi · 230 bar	+59% MF 6255 (A)
Three-point lift at ends declared	8,554 lb · 3,880 kg	9,370 lb · 4,250 kg	+10% MF 6255 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	9,248 lb · 4,195 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	19,401 lb · 8,800 kg	+47% MF 6255 (A)
Wheelbase declared	92.2 in · 2,342 mm	97.8 in · 2,485 mm	+6% MF 6255 (A)
Length declared	174.4 in · 4,430 mm	171.3 in · 4,350 mm	—
Width declared	79.1 in · 2,009 mm	81.5 in · 2,071 mm	—
Height declared	100.4 in · 2,550 mm	112.2 in · 2,850 mm	+12% MF 6255 (A)
Ground clearance declared	17.3 in · 440 mm	16.9 in · 430 mm	—
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	137.4 qt · 130.0 L	+13% MF 6255 (A)

Source

Source