10 material differences · fewer than 12

Tractor oneFiat TL 100 (DT)1998–2004No measured PTO figureTractor twoMassey Ferguson MF 4255 (A)1997–2001No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (DT) and the MF 4255 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat TL 100 (DT) and Massey Ferguson MF 4255 (A), field by field
Field	TL 100 (DT)	MF 4255 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	New Holland-Iveco 8045.25 K	Perkins 1004-4 THR2	differs
Displacement declared	3.91 L	3.99 L	—
Maximum torque declared	245 lb·ft · 332 N·m	248 lb·ft · 336 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.9 gpm · 60.0 L/min	17.2 gpm · 65.0 L/min	+8% MF 4255 (A)
Pressure declared	2,103 psi · 145 bar	3,104–3,481 psi · 214–240 bar	differs
Three-point lift, at the coupling points declared	8,554 lb · 3,880 kg	7,937 lb · 3,600 kg	+8% TL 100 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,623 lb · 4,365 kg	8,135 lb · 3,690 kg	+18% TL 100 (DT)
Maximum permissible mass declared	13,228 lb · 6,000 kg	15,432 lb · 7,000 kg	+17% MF 4255 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	174.4 in · 4,430 mm	157.9 in · 4,010 mm	+10% TL 100 (DT)
Width declared	79.1–105.7 in · 2,009–2,684 mm	78.3–102.0 in · 1,990–2,590 mm	—
Height, over the cab declared	100.4 in · 2,550 mm	102.8 in · 2,610 mm	—
Ground clearance declared	17.3 in · 440 mm	11.4 in · 290 mm	+52% TL 100 (DT)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	196.5 qt · 186.0 L	+62% MF 4255 (A)

Source

Source