Fiat PRIMO 60-66 DT/Turbo or ZETOR 7211/7245?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the PRIMO 60-66 DT/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7211/7245 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The ZETOR 7211/7245 suits loader and hydraulic implement work better on this data: 73% (23.8 L/min / 6.3 gpm) more hydraulic flow.
  • The Fiat PRIMO 60-66 DT/Turbo suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat PRIMO 60-66 DT/Turbo and ZETOR 7211/7245, with the call on each
QuestionPRIMO 60-66 DT/Turbo7211/7245Call
Which puts more power through the PTO shaft?48.6 kW (65.2 hp)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”48.5 kW (65.0 hp)Traktorenlexikon, “Zetor 7211”Not comparableNot comparable on power at the PTO shaft: the PRIMO 60-66 DT/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7211/7245 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the PRIMO 60-66 DT/Turbo and the 7211/7245.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the PRIMO 60-66 DT/Turbo and the 7211/7245.
Which pumps more oil for implements?32.8 L/min (8.7 gpm)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”56.6 L/min (15.0 gpm)Traktorenlexikon, “Zetor 7211”AheadThe ZETOR 7211/7245 has 73% more hydraulic flow (23.8 L/min / 6.3 gpm) than the Fiat PRIMO 60-66 DT/Turbo (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,260 kg (4,982 lb)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”—No figureNo call on three-point lift: no figure on record for the 7211/7245.
Which is heavier, for traction?2,920 kg (6,437 lb)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”3,190 kg (7,033 lb)Traktorenlexikon, “Zetor 7211”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?4,200 kg (9,259 lb)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”—No figureNo call on maximum permissible mass: no figure on record for the 7211/7245.
Which has the wider choice of gears?12Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”10 to 20Traktorenlexikon, “Zetor 7211”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the PRIMO 60-66 DT/Turbo and the 7211/7245.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”25 km/h (15.5 mph)Traktorenlexikon, “Zetor 7211”AheadThe Fiat PRIMO 60-66 DT/Turbo has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 7211/7245 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”540/1000 rpmTraktorenlexikon, “Zetor 7211”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”independentTraktorenlexikon, “Zetor 7211”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Fiat 60-66 Turbo/60-66 DT Turbo”Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 7211”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1988–19921984–1993EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The ZETOR 7211/7245 has 73% more hydraulic flow (23.8 L/min / 6.3 gpm) than the Fiat PRIMO 60-66 DT/Turbo (both pump flow, as stated by the source).
  • The Fiat PRIMO 60-66 DT/Turbo has 20% more top speed (5.0 km/h / 3.1 mph) than the ZETOR 7211/7245 (both top speed forward, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the PRIMO 60-66 DT/Turbo has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 7211/7245 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources