Fiat M 135 or Renault 145-54 TX?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the M 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 145-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat M 135 suits loader and hydraulic implement work better on this data: 137% (56.2 L/min / 14.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat M 135 and Renault 145-54 TX, with the call on each
QuestionM 135145-54 TXCall
Which puts more power through the PTO shaft?99.4 kW (133.3 hp)Traktorenlexikon, “Fiatagri M135”99.4 kW (133.3 hp)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”Not comparableNot comparable on power at the PTO shaft: the M 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 145-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the M 135 and the 145-54 TX.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the M 135 and the 145-54 TX.
Which pumps more oil for implements?97.3 L/min (25.7 gpm)Traktorenlexikon, “Fiatagri M135”41.1 L/min (10.9 gpm)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”AheadThe Fiat M 135 has 137% more hydraulic flow (56.2 L/min / 14.8 gpm) than the Renault 145-54 TX (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?5,060 kg (11,155 lb)Traktorenlexikon, “Fiatagri M135”8,850 kg (19,511 lb)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”Not comparableNot comparable on three-point lift: the M 135: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri M135”); the 145-54 TX: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,356 kg (11,808 lb)Traktorenlexikon, “Fiatagri M135”5,655 kg (12,467 lb)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Fiatagri M135”8,500 kg (18,739 lb)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?18 to 24Traktorenlexikon, “Fiatagri M135”16Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the M 135 and the 145-54 TX.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri M135”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri M135”540/1000 rpmTraktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the M 135 and the 145-54 TX.
Which drives on both axles?4WDTraktorenlexikon, “Fiatagri M135”4WDTraktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–19991989–1990Ahead (a fact, not an advantage)The Fiat M 135 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat M 135 has 137% more hydraulic flow (56.2 L/min / 14.8 gpm) than the Renault 145-54 TX (both pump flow, as stated by the source).
  • The Fiat M 135 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the M 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 145-54 TX has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the M 135: lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri M135”); the 145-54 TX: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Renault 145-54 TE/TA/TS/TX/TZ R7942”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources