Fiat M 100 or Fiat TS 110 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the M 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TS 110 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Fiat M 100 suits loader and hydraulic implement work better on this data: 26% (20.6 L/min / 5.4 gpm) more hydraulic flow and 39% (1,380 kg / 3,042 lb) more three-point lift.
- The Fiat M 100 suits road haulage better on this data: 25% (1,500 kg / 3,307 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | M 100 | TS 110 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 73.6 kW (98.7 hp)Traktorenlexikon, “Fiatagri M100” | 73.6 kW (98.7 hp)Traktorenlexikon, “Fiatagri TS110” | Not comparableNot comparable on power at the PTO shaft: the M 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TS 110 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the M 100 and the TS 110 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the M 100 and the TS 110 (DT). |
| Which pumps more oil for implements? | 99.6 L/min (26.3 gpm)Traktorenlexikon, “Fiatagri M100” | 79.0 L/min (20.9 gpm)Traktorenlexikon, “Fiatagri TS110” | AheadThe Fiat M 100 has 26% more hydraulic flow (20.6 L/min / 5.4 gpm) than the Fiat TS 110 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 4,900 kg (10,803 lb)Traktorenlexikon, “Fiatagri M100” | 3,520 kg (7,760 lb)Traktorenlexikon, “Fiatagri TS110” | AheadThe Fiat M 100 has 39% more lift (1,380 kg / 3,042 lb) than the Fiat TS 110 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,029 kg (11,087 lb)Traktorenlexikon, “Fiatagri M100” | 3,949 kg (8,706 lb)Traktorenlexikon, “Fiatagri TS110” | Ahead (a fact, not an advantage)The Fiat M 100 is 27% heavier (1,080 kg / 2,381 lb) than the Fiat TS 110 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Fiatagri M100” | 6,000 kg (13,228 lb)Traktorenlexikon, “Fiatagri TS110” | AheadThe Fiat M 100 has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat TS 110 (DT) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 18 to 24Traktorenlexikon, “Fiatagri M100” | 12 to 24Traktorenlexikon, “Fiatagri TS110” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the M 100 and the TS 110 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri M100” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri TS110” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiatagri M100” | 540/1000 rpmTraktorenlexikon, “Fiatagri TS110” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiatagri M100” | independentTraktorenlexikon, “Fiatagri TS110” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fiatagri M100” | Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri TS110” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1996–1999 | 1997–2003 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Fiat M 100 has 26% more hydraulic flow (20.6 L/min / 5.4 gpm) than the Fiat TS 110 (DT) (both pump flow, as stated by the source).
- The Fiat M 100 has 39% more lift (1,380 kg / 3,042 lb) than the Fiat TS 110 (DT) (both lift at the hitch ends, as stated by the source).
- The Fiat M 100 is 27% heavier (1,080 kg / 2,381 lb) than the Fiat TS 110 (DT) (both unladen weight, as stated by the source).
- The Fiat M 100 has 25% higher maximum permissible mass (1,500 kg / 3,307 lb) than the Fiat TS 110 (DT) (both maximum permissible mass, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the M 100 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TS 110 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources