10 material differences · fewer than 12

Tractor oneFiat L 95 (DT)1996–1998No measured PTO figureTractor twoMassey Ferguson MF 4255 (A)1997–2001No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the MF 4255 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and Massey Ferguson MF 4255 (A), field by field
Field	L 95 (DT)	MF 4255 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Fiat-Iveco 8045.25 K	Perkins 1004-4 THR2	differs
Displacement declared	3.91 L	3.99 L	—
Maximum torque declared	209 lb·ft · 284 N·m	248 lb·ft · 336 N·m	+18% MF 4255 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	15.9 gpm · 60.0 L/min	17.2 gpm · 65.0 L/min	+8% MF 4255 (A)
Pressure declared	2,103–2,466 psi · 145–170 bar	3,104–3,481 psi · 214–240 bar	differs
Three-point lift, at the coupling points declared	9,259 lb · 4,200 kg	7,937 lb · 3,600 kg	+17% L 95 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	8,135 lb · 3,690 kg	+9% MF 4255 (A)
Maximum permissible mass declared	13,228 lb · 6,000 kg	15,432 lb · 7,000 kg	+17% MF 4255 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	157.5 in · 4,000 mm	157.9 in · 4,010 mm	—
Width declared	79.5–105.7 in · 2,020–2,685 mm	78.3–102.0 in · 1,990–2,590 mm	—
Height, over the cab declared	100.4 in · 2,550 mm	102.8 in · 2,610 mm	—
Ground clearance declared	19.7 in · 500 mm	11.4 in · 290 mm	+72% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	196.5 qt · 186.0 L	+62% MF 4255 (A)

Source

Source