Fiat L 95 (DT) vs Landini 11800 (DT)

14 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1987–2000

No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the 11800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and Landini 11800 (DT), field by field
Field	L 95 (DT)	11800 (DT)	Gap
Engine
Engine power, claimed claimed	93.7 hp	105.7 hp	+13% 11800 (DT)
Engine declared	Fiat-Iveco 8045.25 K	PERKINS TW 6.354-4	differs
Displacement declared	3.91 L	5.80 L	+48% 11800 (DT)
Maximum torque declared	209 lb·ft · 284 N·m	258 lb·ft · 350 N·m	+23% 11800 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	13.5 gpm · 51.2 L/min	+17% L 95 (DT)
Pressure declared	2,103–2,466 psi · 145–170 bar	—	—
Three-point lift at ends declared	9,259 lb · 4,200 kg	9,914 lb · 4,497 kg	+7% 11800 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	9,678 lb · 4,390 kg	+29% 11800 (DT)
Maximum permissible mass declared	13,228 lb · 6,000 kg	15,432 lb · 7,000 kg	+17% 11800 (DT)
Wheelbase declared	92.2 in · 2,342 mm	106.1 in · 2,696 mm	+15% 11800 (DT)
Length declared	157.5 in · 4,000 mm	175.2 in · 4,450 mm	+11% 11800 (DT)
Width declared	79.5 in · 2,020 mm	83.9 in · 2,130 mm	+5% 11800 (DT)
Height declared	100.4 in · 2,550 mm	110.6 in · 2,810 mm	+10% 11800 (DT)
Ground clearance declared	19.7 in · 500 mm	18.0 in · 457 mm	+9% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	200.8 qt · 190.0 L	+65% 11800 (DT)

Source

Source