Fiat L 95 (DT) vs John Deere 3350 (A)

15 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the 3350 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and John Deere 3350 (A), field by field
Field	L 95 (DT)	3350 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	98.7 hp	+5% 3350 (A)
Engine declared	Fiat-Iveco 8045.25 K	John Deere 6.359 DL-009	differs
Displacement declared	3.91 L	5.88 L	+51% 3350 (A)
Maximum torque declared	209 lb·ft · 284 N·m	292 lb·ft · 396 N·m	+39% 3350 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry LuK single-plate clutch as drive clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	13.8 gpm · 52.3 L/min	+15% L 95 (DT)
Pressure declared	2,103–2,466 psi · 145–170 bar	3,336 psi · 230 bar	differs
Three-point lift at ends declared	9,259 lb · 4,200 kg	8,498 lb · 3,855 kg	+9% L 95 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	9,315 lb · 4,225 kg	+24% 3350 (A)
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,771 lb · 6,700 kg	+12% 3350 (A)
Wheelbase declared	92.2 in · 2,342 mm	100.4 in · 2,551 mm	+9% 3350 (A)
Length declared	157.5 in · 4,000 mm	175.8 in · 4,465 mm	+12% 3350 (A)
Width declared	79.5 in · 2,020 mm	88.5 in · 2,249 mm	+11% 3350 (A)
Height declared	100.4 in · 2,550 mm	111.4 in · 2,830 mm	+11% 3350 (A)
Ground clearance declared	19.7 in · 500 mm	25.6 in · 650 mm	+30% 3350 (A)
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source