11 material differences · fewer than 12

Tractor oneFiat L 95 (DT)1996–1998No measured PTO figureTractor twoFord 7740 (A)1991–1997No measured PTO figure

Which should you choose?

Read our verdict on the L 95 (DT) and the 7740 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat L 95 (DT) and Ford 7740 (A), field by field
Field	L 95 (DT)	7740 (A)	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Fiat-Iveco 8045.25 K	FORD-POWERSTAR PA 304 CID-TC	differs
Displacement declared	3.91 L	4.99 L	+28% 7740 (A)
Maximum torque declared	209 lb·ft · 284 N·m	276 lb·ft · 374 N·m	+32% 7740 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	—	—
Pressure declared	2,103–2,466 psi · 145–170 bar	2,582 psi · 178 bar	differs
Three-point lift, at the coupling points declared	9,259 lb · 4,200 kg	9,425 lb · 4,275 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,496 lb · 3,400 kg	8,686 lb · 3,940 kg	+16% 7740 (A)
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	93.0 in · 2,362 mm	—
Length declared	157.5 in · 4,000 mm	176.3 in · 4,478 mm	+12% 7740 (A)
Width declared	79.5–105.7 in · 2,020–2,685 mm	82.5 in · 2,095 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	108.9 in · 2,766 mm	+8% 7740 (A)
Ground clearance declared	19.7 in · 500 mm	17.0 in · 432 mm	+16% L 95 (DT)
Turning radius, braked declared	13.9 ft · 4.25 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	100.0 qt · 94.6 L	+22% L 95 (DT)

Source

Source