Fiat L 95 (DT) or Fiat TL 100 (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the L 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TL 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat L 95 (DT) and Fiat TL 100 (DT), with the call on each
QuestionL 95 (DT)TL 100 (DT)Call
Which puts more power through the PTO shaft?69.9 kW (93.7 hp)Traktorenlexikon, “Fiatagri L95”69.9 kW (93.7 hp)Traktorenlexikon, “Fiatagri TL100”Not comparableNot comparable on power at the PTO shaft: the L 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TL 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the L 95 (DT) and the TL 100 (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the L 95 (DT) and the TL 100 (DT).
Which pumps more oil for implements?60.0 L/min (15.9 gpm)Traktorenlexikon, “Fiatagri L95”60.0 L/min (15.9 gpm)Traktorenlexikon, “Fiatagri TL100”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?4,200 kg (9,259 lb)Traktorenlexikon, “Fiatagri L95”3,880 kg (8,554 lb)Traktorenlexikon, “Fiatagri TL100”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,400 kg (7,496 lb)Traktorenlexikon, “Fiatagri L95”4,365 kg (9,623 lb)Traktorenlexikon, “Fiatagri TL100”Ahead (a fact, not an advantage)The Fiat TL 100 (DT) is 28% heavier (965 kg / 2,127 lb) than the Fiat L 95 (DT) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,000 kg (13,228 lb)Traktorenlexikon, “Fiatagri L95”6,000 kg (13,228 lb)Traktorenlexikon, “Fiatagri TL100”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiatagri L95”20 to 24Traktorenlexikon, “Fiatagri TL100”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?—YesTraktorenlexikon, “Fiatagri TL100”No figureNo call on a creeper range: not stated for the L 95 (DT).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri L95”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri TL100”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “Fiatagri L95”540/540E/1000 rpmTraktorenlexikon, “Fiatagri TL100”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the L 95 (DT) and the TL 100 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri L95”Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri TL100”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–19981998–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat TL 100 (DT) is 28% heavier (965 kg / 2,127 lb) than the Fiat L 95 (DT) (both unladen weight, as stated by the source).
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the L 95 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TL 100 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources