Fiat L 75 (DT) or Massey Ferguson MF 6245 (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 6245 (A) suits loader and hydraulic implement work better on this data: 90% (40.2 L/min / 10.6 gpm) more hydraulic flow.
  • The Massey Ferguson 6245 (A) suits road haulage better on this data: 52% (3,000 kg / 6,614 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat L 75 (DT) and Massey Ferguson MF 6245 (A), with the call on each
QuestionL 75 (DT)MF 6245 (A)Call
Which puts more power through the PTO shaft?62.6 kW (83.9 hp)Traktorenlexikon, “Fiatagri L85”62.6 kW (83.9 hp)Traktorenlexikon, “Massey Ferguson MF 6245”Not comparableNot comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the L 75 (DT) and the MF 6245 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the L 75 (DT) and the MF 6245 (A).
Which pumps more oil for implements?44.5 L/min (11.8 gpm)Traktorenlexikon, “Fiatagri L85”84.7 L/min (22.4 gpm)Traktorenlexikon, “Massey Ferguson MF 6245”AheadThe Massey Ferguson 6245 (A) has 90% more hydraulic flow (40.2 L/min / 10.6 gpm) than the Fiat L 75 (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—4,250 kg (9,370 lb)Traktorenlexikon, “Massey Ferguson MF 6245”No figureNo call on three-point lift: no figure on record for the L 75 (DT).
Which is heavier, for traction?4,270 kg (9,414 lb)Traktorenlexikon, “Fiatagri L85”3,920 kg (8,642 lb)Traktorenlexikon, “Massey Ferguson MF 6245”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?5,800 kg (12,787 lb)Traktorenlexikon, “Fiatagri L85”8,800 kg (19,401 lb)Traktorenlexikon, “Massey Ferguson MF 6245”AheadThe Massey Ferguson 6245 (A) has 52% higher maximum permissible mass (3,000 kg / 6,614 lb) than the Fiat L 75 (DT) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Fiatagri L85”16 to 32Traktorenlexikon, “Massey Ferguson MF 6245”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the L 75 (DT) and the MF 6245 (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri L85”40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6245”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Fiatagri L85”540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6245”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Massey Ferguson MF 6245”No figureNo call on PTO independence: not stated for the L 75 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri L85”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 6245”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1996–19981999–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 6245 (A) has 90% more hydraulic flow (40.2 L/min / 10.6 gpm) than the Fiat L 75 (DT) (both pump flow, as stated by the source).
  • The Massey Ferguson 6245 (A) has 52% higher maximum permissible mass (3,000 kg / 6,614 lb) than the Fiat L 75 (DT) (both maximum permissible mass, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the L 75 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 6245 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources