5 material differences · fewer than 12

Tractor oneFiat L 75 (DT)1996–1998No measured PTO figureTractor twoFiat TL 90 (DT)1998–2004No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the TL 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 11 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) and Fiat TL 90 (DT), field by field
Field	L 75 (DT)	TL 90 (DT)	Gap
Engine
Engine power, claimed claimed	83.9 hp	83.9 hp	—
Engine declared	Fiat-Iveco 8045.25	New Holland-Iveco 8045.25	differs
Displacement declared	3.91 L	3.91 L	—
Maximum torque declared	217 lb·ft · 294 N·m	215 lb·ft · 292 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	15.9 gpm · 60.0 L/min	+35% TL 90 (DT)
Pressure declared	—	2,103 psi · 145 bar	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,414 lb · 4,270 kg	9,315 lb · 4,225 kg	—
Maximum permissible mass declared	12,787 lb · 5,800 kg	13,228 lb · 6,000 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	157.5 in · 4,000 mm	174.4 in · 4,430 mm	+11% TL 90 (DT)
Width declared	79.5–105.7 in · 2,020–2,685 mm	79.1–105.7 in · 2,009–2,684 mm	—
Height, over the cab declared	100.4 in · 2,550 mm	100.4 in · 2,550 mm	—
Ground clearance declared	19.7 in · 500 mm	17.3 in · 440 mm	+14% L 75 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	12.0 ft · 3.65 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source