11 material differences · fewer than 12

Tractor oneFiat L 75 (DT) (Traktorenlexikon)1996–1998No measured PTO figureTractor twoVALMET 6200-41996–2007No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the 6200-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) (Traktorenlexikon) and VALMET 6200-4, field by field
Field	L 75 (DT)	6200-4	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Fiat-Iveco 8045.05 R	VALMET 420 DSRE (44 DT)	differs
Displacement declared	3.91 L	4.40 L	+13% 6200-4
Maximum torque declared	162 lb·ft · 220 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	21.2 gpm · 80.3 L/min	+80% 6200-4
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift, at the coupling points declared	9,259 lb · 4,200 kg	9,601 lb · 4,355 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,237 lb · 4,190 kg	8,929–9,193 lb · 4,050–4,170 kg	—
Maximum permissible mass declared	11,905 lb · 5,400 kg	14,330 lb · 6,500 kg	+20% 6200-4
Wheelbase declared	92.2 in · 2,342 mm	91.6 in · 2,327 mm	—
Length declared	157.5 in · 4,000 mm	177.7 in · 4,514 mm	+13% 6200-4
Width declared	79.5–105.7 in · 2,020–2,685 mm	85.9 in · 2,181 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	106.3 in · 2,700 mm	+6% 6200-4
Ground clearance declared	18.9 in · 480 mm	16.9 in · 430 mm	+12% L 75 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	15.3 ft · 4.65 m	+33% 6200-4
Fuel tank declared	121.5 qt · 115.0 L	167.0 qt · 158.0 L	+37% 6200-4

Source

Source