Fiat L 75 (DT) (Traktorenlexikon) vs New Holland 5635 (A)

1 material differences · fewer than 12

Tractor one

1996–1998

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the 5635 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

1 material differences · 17 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) (Traktorenlexikon) and New Holland 5635 (A), field by field
Field	L 75 (DT)	5635 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Fiat-Iveco 8045.05 R	Iveco 8045.05 R	differs
Displacement declared	3.91 L	3.91 L	—
Maximum torque declared	162 lb·ft · 220 N·m	162 lb·ft · 220 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	11.8 gpm · 44.5 L/min	—
Pressure declared	2,466 psi · 170 bar	2,466 psi · 170 bar	—
Three-point lift at ends declared	9,259 lb · 4,200 kg	9,259 lb · 4,200 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/540E/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,237 lb · 4,190 kg	9,237 lb · 4,190 kg	—
Maximum permissible mass declared	11,905 lb · 5,400 kg	11,905 lb · 5,400 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	157.5 in · 4,000 mm	157.5 in · 4,000 mm	—
Width declared	79.5 in · 2,020 mm	79.5 in · 2,020 mm	—
Height declared	100.4 in · 2,550 mm	100.4 in · 2,550 mm	—
Ground clearance declared	18.9 in · 480 mm	18.9 in · 480 mm	—
Turning radius, braked declared	11.5 ft · 3.50 m	11.5 ft · 3.50 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source