Fiat L 75 (DT) (Traktorenlexikon) vs Ford 5640 (A)

10 material differences · fewer than 12

Tractor one

1996–1998

No measured PTO figure

Tractor two

1991–1997

No measured PTO figure

Which should you choose?

Read our verdict on the L 75 (DT) and the 5640 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat L 75 (DT) (Traktorenlexikon) and Ford 5640 (A), field by field
Field	L 75 (DT)	5640 (A)	Gap
Engine
Engine power, claimed claimed	74.0 hp	74.0 hp	—
Engine declared	Fiat-Iveco 8045.05 R	FORD-POWERSTAR EA 268 CID-NA	differs
Displacement declared	3.91 L	4.39 L	+12% 5640 (A)
Maximum torque declared	162 lb·ft · 220 N·m	202 lb·ft · 274 N·m	+25% 5640 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	9.0 gpm · 34.0 L/min	+31% L 75 (DT)
Pressure declared	2,466 psi · 170 bar	2,582 psi · 178 bar	—
Three-point lift at ends declared	9,259 lb · 4,200 kg	6,349 lb · 2,880 kg	+46% L 75 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,237 lb · 4,190 kg	8,128 lb · 3,687 kg	+14% L 75 (DT)
Maximum permissible mass declared	11,905 lb · 5,400 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	92.1 in · 2,340 mm	—
Length declared	157.5 in · 4,000 mm	159.8 in · 4,058 mm	—
Width declared	79.5 in · 2,020 mm	77.7 in · 1,973 mm	—
Height declared	100.4 in · 2,550 mm	106.9 in · 2,716 mm	+7% 5640 (A)
Ground clearance declared	18.9 in · 480 mm	16.0 in · 406 mm	+18% L 75 (DT)
Turning radius, braked declared	11.5 ft · 3.50 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	100.0 qt · 94.6 L	+22% L 75 (DT)

Source

Source