10 material differences · fewer than 12

Tractor oneFiat L 65 (DT)1996–1998No measured PTO figureTractor twoRenault Ceres 75 (A)1993–1995No measured PTO figure

Which should you choose?

Read our verdict on the L 65 (DT) and the Ceres 75 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat L 65 (DT) and Renault Ceres 75 (A), field by field
Field	L 65 (DT)	Ceres 75 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Fiat-Iveco 8045.06	Perkins LD 80442	differs
Displacement declared	3.61 L	3.86 L	+7% Ceres 75 (A)
Maximum torque declared	146 lb·ft · 198 N·m	176 lb·ft · 239 N·m	+21% Ceres 75 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	11.8 gpm · 44.5 L/min	9.0 gpm · 34.1 L/min	+30% L 65 (DT)
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,548 lb · 2,970 kg	+32% L 65 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	12,125 lb · 5,500 kg	+6% Ceres 75 (A)
Wheelbase declared	92.2 in · 2,342 mm	93.3 in · 2,369 mm	—
Length declared	153.9 in · 3,910 mm	155.2 in · 3,941 mm	—
Width declared	83.5–99.2 in · 2,120–2,520 mm	73.2–92.3 in · 1,860–2,345 mm	differs
Height, over the cab declared	98.4 in · 2,500 mm	99.2 in · 2,520 mm	—
Ground clearance declared	18.9 in · 480 mm	17.7 in · 450 mm	+7% L 65 (DT)
Turning radius, braked declared	12.4 ft · 3.79 m	12.5 ft · 3.80 m	—
Fuel tank declared	84.5 qt · 80.0 L	121.5 qt · 115.0 L	+44% Ceres 75 (A)

Source

Source