Fiat L 65 (DT) vs Massey Ferguson MF 4325 (A)

9 material differences · fewer than 12

Tractor one

1996–1998

No measured PTO figure

Tractor two

2001–2003

No measured PTO figure

Which should you choose?

Read our verdict on the L 65 (DT) and the MF 4325 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Fiat L 65 (DT) and Massey Ferguson MF 4325 (A), field by field
Field	L 65 (DT)	MF 4325 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	66.1 hp	—
Engine declared	Fiat-Iveco 8045.06	Perkins 1004.40	differs
Displacement declared	3.61 L	3.99 L	+10% MF 4325 (A)
Maximum torque declared	146 lb·ft · 198 N·m	193 lb·ft · 261 N·m	+32% MF 4325 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	2,103 psi · 145 bar	2,031 psi · 140 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,744 lb · 3,059 kg	+5% MF 4325 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540/1000/540E rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,936 lb · 3,146 kg	+24% L 65 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	14,330 lb · 6,500 kg	+25% MF 4325 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	153.9 in · 3,910 mm	151.6 in · 3,850 mm	—
Width declared	83.5 in · 2,120 mm	76.8 in · 1,950 mm	+9% L 65 (DT)
Height declared	98.4 in · 2,500 mm	96.5 in · 2,450 mm	—
Ground clearance declared	18.9 in · 480 mm	19.3 in · 490 mm	—
Turning radius, braked declared	12.4 ft · 3.79 m	—	—
Fuel tank declared	84.5 qt · 80.0 L	88.8 qt · 84.0 L	—

Source

Source