Fiat L 65 (DT) vs Ford 4830 (A)

13 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1990–1992

No measured PTO figure

Which should you choose?

Read our verdict on the L 65 (DT) and the 4830 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat L 65 (DT) and Ford 4830 (A), field by field
Field	L 65 (DT)	4830 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Fiat-Iveco 8045.06	Ford L 256 CID-NA	differs
Displacement declared	3.61 L	4.19 L	+16% 4830 (A)
Maximum torque declared	146 lb·ft · 198 N·m	184 lb·ft · 250 N·m	+26% 4830 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Pedal-operated dry AP single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	9.3 gpm · 35.3 L/min	+26% L 65 (DT)
Pressure declared	2,103 psi · 145 bar	1,378–1,450 psi · 95–100 bar	differs
Three-point lift at ends declared	6,393 lb · 2,900 kg	4,381 lb · 1,987 kg	+46% L 65 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,526 lb · 2,960 kg	+32% L 65 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	89.6 in · 2,276 mm	—
Length declared	153.9 in · 3,910 mm	143.7 in · 3,650 mm	+7% L 65 (DT)
Width declared	83.5 in · 2,120 mm	69.7 in · 1,771 mm	+20% L 65 (DT)
Height declared	98.4 in · 2,500 mm	100.3 in · 2,548 mm	—
Ground clearance declared	18.9 in · 480 mm	12.0 in · 305 mm	+57% L 65 (DT)
Turning radius, braked declared	12.4 ft · 3.79 m	—	—
Fuel tank declared	84.5 qt · 80.0 L	69.4 qt · 65.7 L	+22% L 65 (DT)

Source

Source