Fiat L 60 (DT) vs Renault Ceres 70 X (A)

8 material differences · fewer than 12

Tractor one

1996–1998

No measured PTO figure

Tractor two

1992–1995

No measured PTO figure

Which should you choose?

Read our verdict on the L 60 (DT) and the Ceres 70 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 10 fields identical or within 5%, which is not counted as material

Fiat L 60 (DT) and Renault Ceres 70 X (A), field by field
Field	L 60 (DT)	Ceres 70 X (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	59.3 hp	—
Engine declared	Fiat-Iveco 8035.05	MWM D 226-3	differs
Displacement declared	2.93 L	3.12 L	+6% Ceres 70 X (A)
Maximum torque declared	138 lb·ft · 187 N·m	140 lb·ft · 190 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Dry LuK double clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	11.8 gpm · 44.5 L/min	12.7 gpm · 48.0 L/min	+8% Ceres 70 X (A)
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	6,184 lb · 2,805 kg	+40% L 60 (DT)
Maximum permissible mass declared	11,464 lb · 5,200 kg	11,398 lb · 5,170 kg	—
Wheelbase declared	92.2 in · 2,342 mm	93.3 in · 2,369 mm	—
Length declared	153.9 in · 3,910 mm	150.1 in · 3,812 mm	—
Width declared	83.5 in · 2,120 mm	73.2 in · 1,860 mm	+14% L 60 (DT)
Height declared	98.4 in · 2,500 mm	99.2 in · 2,520 mm	—
Ground clearance declared	18.9 in · 480 mm	17.7 in · 450 mm	+7% L 60 (DT)
Turning radius, braked declared	12.4 ft · 3.79 m	12.5 ft · 3.80 m	—
Fuel tank declared	121.5 qt · 115.0 L	137.4 qt · 130.0 L	+13% Ceres 70 X (A)

Source

Source