Fiat L 60 (DT) vs New Holland 4635

2 material differences · fewer than 12

Tractor one

1996–1998

No measured PTO figure

Tractor two

1996–1998

No measured PTO figure

Which should you choose?

Read our verdict on the L 60 (DT) and the 4635 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

2 material differences · 16 fields identical or within 5%, which is not counted as material

Fiat L 60 (DT) and New Holland 4635, field by field
Field	L 60 (DT)	4635	Gap
Engine
Engine power, claimed claimed	59.3 hp	59.3 hp	—
Engine declared	Fiat-Iveco 8035.05	Iveco 8035.05	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	138 lb·ft · 187 N·m	138 lb·ft · 187 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	—	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	11.8 gpm · 44.5 L/min	—
Pressure declared	2,103 psi · 145 bar	2,103 psi · 145 bar	—
Three-point lift at ends declared	6,393 lb · 2,900 kg	4,850 lb · 2,200 kg	+32% L 60 (DT)
Rear PTO speeds declared	540/540E/1000 rpm	540/540E/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	8,686 lb · 3,940 kg	—
Maximum permissible mass declared	11,464 lb · 5,200 kg	11,464 lb · 5,200 kg	—
Wheelbase declared	92.2 in · 2,342 mm	92.2 in · 2,342 mm	—
Length declared	153.9 in · 3,910 mm	153.9 in · 3,910 mm	—
Width declared	83.5 in · 2,120 mm	83.5 in · 2,120 mm	—
Height declared	98.4 in · 2,500 mm	98.4 in · 2,500 mm	—
Ground clearance declared	18.9 in · 480 mm	18.9 in · 480 mm	—
Turning radius, braked declared	12.4 ft · 3.79 m	12.4 ft · 3.79 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source