10 material differences · fewer than 12
Tractor oneFiat L 60 (DT)1996–1998No measured PTO figureTractor twoMassey Ferguson MF 4220 (A)1997–2001No measured PTO figure
Which should you choose?
Read our verdict on the L 60 (DT) and the MF 4220 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | L 60 (DT) | MF 4220 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.3 hp | 59.3 hp | — |
| Engine declared | Fiat-Iveco 8035.05 | Perkins 903.27 Turbo | differs |
| Displacement declared | 2.93 L | 2.50 L | +17% L 60 (DT) |
| Maximum torque declared | 138 lb·ft · 187 N·m | 164 lb·ft · 223 N·m | +19% MF 4220 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 11.8 gpm · 44.5 L/min | — | — |
| Pressure declared | 2,103 psi · 145 bar | 2,031 psi · 140 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,686 lb · 3,940 kg | 5,258 lb · 2,385 kg | +65% L 60 (DT) |
| Maximum permissible mass declared | 11,464 lb · 5,200 kg | — | — |
| Wheelbase declared | 92.2 in · 2,342 mm | 83.9 in · 2,130 mm | +10% L 60 (DT) |
| Length declared | 153.9 in · 3,910 mm | 147.2 in · 3,740 mm | — |
| Width declared | 83.5–99.2 in · 2,120–2,520 mm | 78.0–90.3 in · 1,982–2,294 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 8.3 in · 210 mm | +129% L 60 (DT) |
| Turning radius, braked declared | 12.4 ft · 3.79 m | — | — |
| Fuel tank declared | 121.5 qt · 115.0 L | 88.8 qt · 84.0 L | +37% L 60 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat L 60 (DT) sources
- Source: Traktorenlexikon, “Fiatagri L60”
Massey Ferguson MF 4220 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4220”