Fiat G 190 or Steyr 9190 a?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the G 190 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat G 190 suits loader and hydraulic implement work better on this data: 139% (73.3 L/min / 19.4 gpm) more hydraulic flow and 37% (2,670 kg / 5,886 lb) more three-point lift.
  • The Fiat G 190 suits road haulage better on this data: 27% (3,000 kg / 6,614 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat G 190 and Steyr 9190 a, with the call on each
QuestionG 1909190 aCall
Which puts more power through the PTO shaft?139.8 kW (187.5 hp)Traktorenlexikon, “Fiatagri G190”139.8 kW (187.5 hp)Traktorenlexikon, “Steyr 9190 a”Not comparableNot comparable on power at the PTO shaft: the G 190 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the G 190 and the 9190 a.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the G 190 and the 9190 a.
Which pumps more oil for implements?126.1 L/min (33.3 gpm)Traktorenlexikon, “Fiatagri G190”52.8 L/min (13.9 gpm)Traktorenlexikon, “Steyr 9190 a”AheadThe Fiat G 190 has 139% more hydraulic flow (73.3 L/min / 19.4 gpm) than the Steyr 9190a (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?9,870 kg (21,760 lb)Traktorenlexikon, “Fiatagri G190”7,200 kg (15,873 lb)Traktorenlexikon, “Steyr 9190 a”AheadThe Fiat G 190 has 37% more lift (2,670 kg / 5,886 lb) than the Steyr 9190a (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?8,748 kg (19,286 lb)Traktorenlexikon, “Fiatagri G190”6,300 kg (13,889 lb)Traktorenlexikon, “Steyr 9190 a”Ahead (a fact, not an advantage)The Fiat G 190 is 39% heavier (2,448 kg / 5,397 lb) than the Steyr 9190a (both unladen weight, as stated by the source).
Which may carry more ballast and load?14,000 kg (30,865 lb)Traktorenlexikon, “Fiatagri G190”11,000 kg (24,251 lb)Traktorenlexikon, “Steyr 9190 a”AheadThe Fiat G 190 has 27% higher maximum permissible mass (3,000 kg / 6,614 lb) than the Steyr 9190a (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?16 to 18Traktorenlexikon, “Fiatagri G190”32Traktorenlexikon, “Steyr 9190 a”AheadThe Steyr 9190a has 78% more forward gears (14 gears) than the Fiat G 190 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the G 190 and the 9190 a.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri G190”40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9190 a”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Fiatagri G190”540/1000 rpmTraktorenlexikon, “Steyr 9190 a”AheadThe Steyr 9190a offers 540 rpm at the PTO, which the Fiat G 190 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri G190”—No figureNo call on PTO independence: not stated for the 9190 a.
Which drives on both axles?4WDTraktorenlexikon, “Fiatagri G190”4WDTraktorenlexikon, “Steyr 9190 a”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–20021993–1995EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat G 190 has 139% more hydraulic flow (73.3 L/min / 19.4 gpm) than the Steyr 9190a (both pump flow, as stated by the source).
  • The Fiat G 190 has 37% more lift (2,670 kg / 5,886 lb) than the Steyr 9190a (both lift at the hitch ends, as stated by the source).
  • The Fiat G 190 is 39% heavier (2,448 kg / 5,397 lb) than the Steyr 9190a (both unladen weight, as stated by the source).
  • The Fiat G 190 has 27% higher maximum permissible mass (3,000 kg / 6,614 lb) than the Steyr 9190a (both maximum permissible mass, as stated by the source).
  • The Steyr 9190a has 78% more forward gears (14 gears) than the Fiat G 190 (both forward gears, as stated by the source).
  • The Steyr 9190a offers 540 rpm at the PTO, which the Fiat G 190 does not (as stated by the sources).
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the G 190 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9190 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources