Fiat G 190 vs John Deere 4840

10 material differences · fewer than 12

Tractor one

1993–2002

No measured PTO figure

Tractor two

1978–1982

No measured PTO figure

Which should you choose?

Read our verdict on the G 190 and the 4840 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat G 190 and John Deere 4840, field by field
Field	G 190	4840	Gap
Engine
Engine power, claimed claimed	187.5 hp	178.6 hp	—
Engine declared	New Holland TA 456 CID/TC	John Deere 6.466 AT	differs
Displacement declared	7.49 L	7.64 L	—
Maximum torque declared	632 lb·ft · 857 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Electro-hydraulically operated wet Funk multi-disc clutch	Hydraulically operated oil-cooled double-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	33.3 gpm · 126.1 L/min	23.0 gpm · 87.1 L/min	+45% G 190
Pressure declared	2,495 psi · 172 bar	3,481 psi · 240 bar	+40% 4840
Three-point lift at ends declared	21,760 lb · 9,870 kg	8,294 lb · 3,762 kg	+162% G 190
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	19,286 lb · 8,748 kg	14,899 lb · 6,758 kg	+29% G 190
Maximum permissible mass declared	30,865 lb · 14,000 kg	—	—
Wheelbase declared	122.6 in · 3,115 mm	118.5 in · 3,010 mm	—
Length declared	213.6 in · 5,426 mm	176.8 in · 4,490 mm	+21% G 190
Width declared	112.0 in · 2,845 mm	95.7 in · 2,430 mm	+17% G 190
Height declared	122.8 in · 3,118 mm	116.9 in · 2,970 mm	—
Ground clearance declared	20.0 in · 507 mm	—	—
Turning radius, braked declared	—	13.5 ft · 4.10 m	—
Fuel tank declared	439.6 qt · 416.0 L	412.0 qt · 389.9 L	+7% G 190

Source

Source