Fiat G 190 vs International Harvester 5488
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 190 and the 5488 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | G 190 | 5488 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 187.5 hp | 187.3 hp | — |
| Engine declared | New Holland TA 456 CID/TC | INTERNATIONAL HARVESTER DTI-466 B | differs |
| Displacement declared | 7.49 L | 7.64 L | — |
| Maximum torque declared | 632 lb·ft · 857 N·m | 585 lb·ft · 793 N·m | +8% G 190 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Electro-hydraulically operated wet Funk multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 33.3 gpm · 126.1 L/min | — | — |
| Pressure declared | 2,495 psi · 172 bar | — | — |
| Three-point lift at ends declared | 21,760 lb · 9,870 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 19,286 lb · 8,748 kg | 17,240 lb · 7,820 kg | +12% G 190 |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | — | — |
| Wheelbase declared | 122.6 in · 3,115 mm | 111.6 in · 2,835 mm | +10% G 190 |
| Length declared | 213.6 in · 5,426 mm | 196.6 in · 4,994 mm | +9% G 190 |
| Width declared | 112.0 in · 2,845 mm | 114.0 in · 2,896 mm | — |
| Height declared | 122.8 in · 3,118 mm | 116.0 in · 2,946 mm | +6% G 190 |
| Ground clearance declared | 20.0 in · 507 mm | 18.3 in · 465 mm | +9% G 190 |
| Turning radius, braked declared | — | 12.6 ft · 3.84 m | — |
| Fuel tank declared | 439.6 qt · 416.0 L | 348.0 qt · 329.3 L | +26% G 190 |
Fiat G 190 sources
Source
- Source: Traktorenlexikon, “Fiatagri G190”
International Harvester 5488 sources
Source
- Source: Traktorenlexikon, “IHC 5488”