Fiat 80-88/80-88 DT vs URSUS 932/934
7 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because the drive differs (4WD; 2WD / 4WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 80-88/80-88 DT | 932/934 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 78.9 hp | — |
| Engine declared | — | Z.T.S.-MARTIN Z-8401.12 | — |
| Displacement declared | — | 4.56 L | — |
| Maximum torque declared | 197 lb·ft · 267 N·m | 187 lb·ft · 254 N·m | — |
| Transmission | |||
| Top speed declared | 23.6 mph · 38 km/h | 18.6 mph · 30 km/h | +27% 80-88/80-88 DT |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 11.9 gpm · 45.2 L/min | — |
| Pressure declared | — | 2,828 psi · 195 bar | — |
| Three-point lift at ends declared | — | 9,054 lb · 4,107 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,562 lb · 3,430 kg | 9,348 lb · 4,240 kg | +24% 932/934 |
| Maximum permissible mass declared | — | 16,314 lb · 7,400 kg | — |
| Wheelbase declared | — | 94.0 in · 2,387 mm | — |
| Length declared | 144.9 in · 3,680 mm | 162.6 in · 4,130 mm | +12% 932/934 |
| Width declared | 86.6 in · 2,200 mm | 77.4 in · 1,966 mm | +12% 80-88/80-88 DT |
| Height declared | 102.8 in · 2,610 mm | 115.7 in · 2,940 mm | +13% 932/934 |
| Ground clearance declared | 16.9 in · 430 mm | 13.6 in · 345 mm | +25% 80-88/80-88 DT |
| Turning radius, braked declared | — | 11.7 ft · 3.58 m | — |
| Fuel tank declared | — | 95.1 qt · 90.0 L | — |
Fiat 80-88/80-88 DT sources
Source
- Source: Traktorenlexikon, “Fiatagri 80-88/80-88 DT”
URSUS 932/934 sources
Source
- Source: Traktorenlexikon, “Ursus 932/934”