Fiat F-130 DT or International Harvester 3688?

Which should you choose?

On performance, every comparable figure that differs favours the International Harvester 3688: hydraulic flow.

  • The International Harvester 3688 suits loader and hydraulic implement work better on this data: 21% (11.6 L/min / 3.1 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat F-130 DT and International Harvester 3688, with the call on each
QuestionF-130 DT3688Call
Which puts more power through the PTO shaft?84.0 kW (112.6 hp)Traktorenlexikon, “Fiatagri F130 DT”83.8 kW (112.4 hp)Traktorenlexikon, “IHC 3688”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the F-130 DT and the 3688.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the F-130 DT and the 3688.
Which pumps more oil for implements?56.5 L/min (14.9 gpm)Traktorenlexikon, “Fiatagri F130 DT”68.1 L/min (18.0 gpm)Traktorenlexikon, “IHC 3688”AheadThe International Harvester 3688 has 21% more hydraulic flow (11.6 L/min / 3.1 gpm) than the Fiat F-130 DT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,567 kg (14,478 lb)Traktorenlexikon, “Fiatagri F130 DT”No figureNo call on three-point lift: no figure on record for the 3688.
Which is heavier, for traction?5,450 kg (12,015 lb)Traktorenlexikon, “Fiatagri F130 DT”5,988 kg (13,201 lb)Traktorenlexikon, “IHC 3688”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,100 kg (17,857 lb)Traktorenlexikon, “Fiatagri F130 DT”No figureNo call on maximum permissible mass: no figure on record for the 3688.
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Fiatagri F130 DT”16Traktorenlexikon, “IHC 3688”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the F-130 DT and the 3688.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri F130 DT”32 km/h (19.9 mph)Traktorenlexikon, “IHC 3688”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri F130 DT”540/1000 rpmTraktorenlexikon, “IHC 3688”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri F130 DT”No figureNo call on PTO independence: not stated for the 3688.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri F130 DT”Two-wheel or four-wheel driveTraktorenlexikon, “IHC 3688”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1990–19961981–1985Ahead (a fact, not an advantage)The Fiat F-130 DT is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 3688 has 21% more hydraulic flow (11.6 L/min / 3.1 gpm) than the Fiat F-130 DT (both pump flow, as stated by the source).
  • The Fiat F-130 DT is newer: production began 9 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources