Fiat F-120 DT or URSUS 1122 / 1124?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the F-120 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1122 / 1124 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Fiat F-120 DT suits loader and hydraulic implement work better on this data: 28% (12.5 L/min / 3.3 gpm) more hydraulic flow.
  • The Fiat F-120 DT suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat F-120 DT and URSUS 1122 / 1124, with the call on each
QuestionF-120 DT1122 / 1124Call
Which puts more power through the PTO shaft?86.8 kW (116.4 hp)Traktorenlexikon, “Fiatagri F120 DT”87.5 kW (117.3 hp)Traktorenlexikon, “Ursus 1222/1224”Not comparableNot comparable on power at the PTO shaft: the F-120 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1122 / 1124 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the F-120 DT and the 1122 / 1124.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the F-120 DT and the 1122 / 1124.
Which pumps more oil for implements?56.5 L/min (14.9 gpm)Traktorenlexikon, “Fiatagri F120 DT”44.0 L/min (11.6 gpm)Traktorenlexikon, “Ursus 1222/1224”AheadThe Fiat F-120 DT has 28% more hydraulic flow (12.5 L/min / 3.3 gpm) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,440 kg (9,789 lb)Traktorenlexikon, “Fiatagri F120 DT”4,130 kg (9,105 lb)Traktorenlexikon, “Ursus 1222/1224”Not comparableNot comparable on three-point lift: the F-120 DT: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri F120 DT”); the 1122 / 1124: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ursus 1222/1224”) — not the same quantity, basis and condition.
Which is heavier, for traction?5,370 kg (11,839 lb)Traktorenlexikon, “Fiatagri F120 DT”4,184 kg (9,224 lb)Traktorenlexikon, “Ursus 1222/1224”Ahead (a fact, not an advantage)The Fiat F-120 DT is 28% heavier (1,186 kg / 2,615 lb) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,100 kg (17,857 lb)Traktorenlexikon, “Fiatagri F120 DT”—No figureNo call on maximum permissible mass: no figure on record for the 1122 / 1124.
Which has the wider choice of gears?16 to 32Traktorenlexikon, “Fiatagri F120 DT”16Traktorenlexikon, “Ursus 1222/1224”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the F-120 DT and the 1122 / 1124.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri F120 DT”25 km/h (15.5 mph)Traktorenlexikon, “Ursus 1222/1224”AheadThe Fiat F-120 DT has 20% more top speed (5.0 km/h / 3.1 mph) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri F120 DT”540/1000 rpmTraktorenlexikon, “Ursus 1222/1224”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri F120 DT”—No figureNo call on PTO independence: not stated for the 1122 / 1124.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiatagri F120 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Ursus 1222/1224”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1990–19931984–2009Ahead (a fact, not an advantage)The Fiat F-120 DT is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat F-120 DT has 28% more hydraulic flow (12.5 L/min / 3.3 gpm) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both pump flow, as stated by the source).
  • The Fiat F-120 DT is 28% heavier (1,186 kg / 2,615 lb) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both unladen weight, as stated by the source).
  • The Fiat F-120 DT has 20% more top speed (5.0 km/h / 3.1 mph) than the URSUS 1122 / 1124 (also listed as 1222/1224) (both top speed forward, as stated by the source).
  • The Fiat F-120 DT is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the F-120 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1122 / 1124 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the F-120 DT: lift 610 mm behind the hitch ends, as stated by the source (Traktorenlexikon, “Fiatagri F120 DT”); the 1122 / 1124: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Ursus 1222/1224”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources