Fiat F-115 DT vs Massey Ferguson MF 3115 (A)

7 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

1990–1993

No measured PTO figure

Which should you choose?

Read our verdict on the F-115 DT and the MF 3115 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

Fiat F-115 DT and Massey Ferguson MF 3115 (A), field by field
Field	F-115 DT	MF 3115 (A)	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	FIAT-IVECO 8065.05	Perkins 1006-6 HR	differs
Displacement declared	5.86 L	5.99 L	—
Maximum torque declared	317 lb·ft · 430 N·m	305 lb·ft · 413 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated hydraulic dry LUK double clutch	pedal-operated dry and air-cooled VALEO single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	13.2 gpm · 50.0 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	—	12,214 lb · 5,540 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,700 lb · 4,400 kg	9,987 lb · 4,530 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	17,637 lb · 8,000 kg	+7% MF 3115 (A)
Wheelbase declared	109.4 in · 2,780 mm	106.1 in · 2,696 mm	—
Length declared	185.4 in · 4,710 mm	170.2 in · 4,323 mm	+9% F-115 DT
Width declared	91.3 in · 2,320 mm	74.8 in · 1,899 mm	+22% F-115 DT
Height declared	110.6 in · 2,810 mm	109.2 in · 2,774 mm	—
Ground clearance declared	—	18.0 in · 457 mm	—
Turning radius, braked declared	16.3 ft · 4.98 m	—	—
Fuel tank declared	232.5 qt · 220.0 L	182.8 qt · 173 L	+27% F-115 DT

Source

Source