Fiat F-115 DT vs John Deere 6520

7 material differences · fewer than 12

Tractor one

1993–1996

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the F-115 DT and the 6520 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat F-115 DT and John Deere 6520, field by field
Field	F-115 DT	6520	Gap
Engine
Engine power, claimed claimed	113.5 hp	113.5 hp	—
Engine declared	FIAT-IVECO 8065.05	John Deere PowrTech 6.068 HLA-V2 or 6.068 HL-4V/CR	differs
Displacement declared	5.86 L	6.79 L	+16% 6520
Maximum torque declared	317 lb·ft · 430 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Pedal operated hydraulic dry LUK double clutch	—	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	14,881 lb · 6,750 kg	—
Rear PTO speeds declared	540/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,700 lb · 4,400 kg	11,199–11,773 lb · 5,080–5,340 kg	differs
Maximum permissible mass declared	16,535 lb · 7,500 kg	18,739 lb · 8,500 kg	+13% 6520
Wheelbase declared	109.4 in · 2,780 mm	104.3 in · 2,650 mm	—
Length declared	185.4 in · 4,710 mm	186.1 in · 4,728 mm	—
Width declared	91.3 in · 2,320 mm	91.2 in · 2,316 mm	—
Height declared	110.6 in · 2,810 mm	112.5 in · 2,858 mm	—
Ground clearance declared	—	22.4 in · 570 mm	—
Turning radius, braked declared	16.3 ft · 4.98 m	—	—
Fuel tank declared	232.5 qt · 220.0 L	218.7 qt · 207.0 L	+6% F-115 DT

Source

Source