Fiat F-110 DT vs Massey Ferguson MF 4270 (A)

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2001

No measured PTO figure

Which should you choose?

Read our verdict on the F-110 DT and the MF 4270 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Fiat F-110 DT and Massey Ferguson MF 4270 (A), field by field
Field	F-110 DT	MF 4270 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	Perkins 1006-6 HR3	differs
Displacement declared	5.86 L	5.99 L	—
Maximum torque declared	267 lb·ft · 362 N·m	305 lb·ft · 414 N·m	+14% MF 4270 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal-operated, dry and air-cooled single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pressure declared	3,046–3,118 psi · 210–215 bar	—	—
Three-point lift at ends declared	—	10,185 lb · 4,620 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,692 lb · 4,850 kg	8,554 lb · 3,880 kg	+25% F-110 DT
Maximum permissible mass declared	16,535 lb · 7,500 kg	15,432 lb · 7,000 kg	+7% F-110 DT
Wheelbase declared	106.0 in · 2,692 mm	102.7 in · 2,609 mm	—
Length declared	185.4 in · 4,710 mm	172.8 in · 4,390 mm	+7% F-110 DT
Width declared	83.1 in · 2,110 mm	78.3 in · 1,990 mm	+6% F-110 DT
Height declared	109.4 in · 2,780 mm	106.8 in · 2,713 mm	—
Ground clearance declared	19.9 in · 505 mm	13.8 in · 350 mm	+44% F-110 DT
Turning radius, braked declared	15.8 ft · 4.81 m	—	—
Fuel tank declared	232.5 qt · 220.0 L	213.5 qt · 202.0 L	+9% F-110 DT

Source

Source