Fiat F-110 DT vs John Deere 7210

11 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the F-110 DT and the 7210 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat F-110 DT and John Deere 7210, field by field
Field	F-110 DT	7210	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	John Deere 6.068 TRW-50	differs
Displacement declared	5.86 L	6.79 L	+16% 7210
Maximum torque declared	267 lb·ft · 362 N·m	324 lb·ft · 439 N·m	+21% 7210
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal-operated, hydraulic-wet John Deere multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	27.3 gpm · 103.3 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	2,944–3,031 psi · 203–209 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,692 lb · 4,850 kg	11,490 lb · 5,212 kg	+7% 7210
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	106.0 in · 2,692 mm	111.8 in · 2,840 mm	+5% 7210
Length declared	185.4 in · 4,710 mm	174.6 in · 4,435 mm	+6% F-110 DT
Width declared	83.1 in · 2,110 mm	96.0 in · 2,438 mm	+16% 7210
Height declared	109.4 in · 2,780 mm	113.4 in · 2,880 mm	—
Ground clearance declared	19.9 in · 505 mm	15.7 in · 400 mm	+26% F-110 DT
Turning radius, braked declared	15.8 ft · 4.81 m	—	—
Fuel tank declared	232.5 qt · 220.0 L	199.7 qt · 189.0 L	+16% F-110 DT

Source

Source