7 material differences · fewer than 12

Tractor oneFiat F-110 DT1990–1993No measured PTO figureTractor twoJohn Deere 4040 (A)1977–1985No measured PTO figure

Which should you choose?

Read our verdict on the F-110 DT and the 4040 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 9 fields identical or within 5%, which is not counted as material

Fiat F-110 DT and John Deere 4040 (A), field by field
Field	F-110 DT	4040 (A)	Gap
Engine
Engine power, claimed claimed	109 hp	109 hp	—
Engine declared	FIAT-IVECO 8065.05	John Deere 6.359 TL	differs
Displacement declared	5.86 L	5.88 L	—
Maximum torque declared	267 lb·ft · 362 N·m	299 lb·ft · 405 N·m	+12% 4040 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated hydraulic dry LUK double clutch	Pedal-operated hydraulic and oil-cooled double-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	—	25.4 gpm · 96.0 L/min	—
Pressure declared	3,046–3,118 psi · 210–215 bar	3,481 psi · 240 bar	differs
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,692 lb · 4,850 kg	11,171 lb · 5,067 kg	—
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	106.0 in · 2,692 mm	104.0 in · 2,642 mm	—
Length declared	185.4 in · 4,710 mm	176.5 in · 4,483 mm	—
Width declared	83.1–106.3 in · 2,110–2,700 mm	78.3–122.8 in · 1,990–3,118 mm	differs
Height, over the cab declared	109.4 in · 2,780 mm	112.6 in · 2,861 mm	—
Ground clearance declared	19.9 in · 505 mm	20.3 in · 515 mm	—
Turning radius, braked declared	15.8 ft · 4.81 m	—	—
Fuel tank declared	232.5 qt · 220.0 L	147.9 qt · 140.0 L	+57% F-110 DT

Source

Source