11 material differences · fewer than 12
Tractor oneFiat F-110 DT1990–1993No measured PTO figureTractor twoJohn Deere 32551991–1993No measured PTO figure
Which should you choose?
Read our verdict on the F-110 DT and the 3255 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | F-110 DT | 3255 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 109 hp | 109.6 hp | — |
| Engine declared | FIAT-IVECO 8065.05 | John Deere 6.359 TL-007 | differs |
| Displacement declared | 5.86 L | 5.88 L | — |
| Maximum torque declared | 267 lb·ft · 362 N·m | 305 lb·ft · 413 N·m | +14% 3255 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Pedal-operated hydraulic dry LUK double clutch | Pedal-operated dry LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 24.8 gpm · 93.9 L/min | — |
| Pressure declared | 3,046–3,118 psi · 210–215 bar | 2,321 psi · 160 bar | differs |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,692 lb · 4,850 kg | 11,729 lb · 5,320 kg | +10% 3255 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 106.0 in · 2,692 mm | 101.7 in · 2,582 mm | — |
| Length declared | 185.4 in · 4,710 mm | 172.0 in · 4,370 mm | +8% F-110 DT |
| Width declared | 83.1–106.3 in · 2,110–2,700 mm | 90.2 in · 2,290 mm | differs |
| Ground clearance declared | 19.9 in · 505 mm | 16.5 in · 420 mm | +20% F-110 DT |
| Turning radius, braked declared | 15.8 ft · 4.81 m | 14.5 ft · 4.41 m | +9% F-110 DT |
| Fuel tank declared | 232.5 qt · 220.0 L | 182.8 qt · 173.0 L | +27% F-110 DT |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat F-110 DT sources
- Source: Traktorenlexikon, “Fiatagri F110 DT”
- Source: Traktorenlexikon, “Fiatagri 110-90 DT”
John Deere 3255 sources
- Source: Traktorenlexikon, “John Deere 3255”
- Source: Traktorenlexikon, “John Deere 3650”