Fiat F-100 DT vs VALMET 8000

5 material differences · fewer than 12

Tractor one

1990–1996

No measured PTO figure

Tractor two

1991–1996

No measured PTO figure

Which should you choose?

Read our verdict on the F-100 DT and the 8000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 9 fields identical or within 5%, which is not counted as material

Fiat F-100 DT and VALMET 8000, field by field
Field	F-100 DT	8000	Gap
Engine
Engine power, claimed claimed	96.7 hp	96.7 hp	—
Engine declared	FIAT-IVECO 8065.06.300 or 8065.05 A	VALMET 620 D	differs
Displacement declared	—	6.59 L	—
Maximum torque declared	241 lb·ft · 327 N·m	270 lb·ft · 366 N·m	+12% 8000
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	pedal-operated hydraulic dry LUK single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	—	17.5 gpm · 66.4 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	9,469 lb · 4,295 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,582 lb · 4,800 kg	10,053 lb · 4,560 kg	+5% F-100 DT
Maximum permissible mass declared	16,535 lb · 7,500 kg	16,535 lb · 7,500 kg	—
Wheelbase declared	106.0 in · 2,692 mm	100.7 in · 2,558 mm	—
Length declared	185.4 in · 4,710 mm	186.6 in · 4,740 mm	—
Width declared	83.1 in · 2,110 mm	85.4 in · 2,170 mm	—
Height declared	109.4 in · 2,780 mm	107.1 in · 2,720 mm	—
Ground clearance declared	19.9 in · 505 mm	14.0 in · 355 mm	+42% F-100 DT
Turning radius, braked declared	16.0 ft · 4.87 m	15.5 ft · 4.71 m	—
Fuel tank declared	232.5 qt · 220.0 L	167.0 qt · 158.0 L	+39% F-100 DT

Source

Source