Fiat 900 (DT) vs VALMET 702 S (A)

11 material differences · fewer than 12

Tractor one

Fiat 900 (DT)

1969–1972

No measured PTO figure

Tractor two

VALMET 702 S (A)

1974–1979

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1969–1972; 1974–1979). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 4 fields identical or within 5%, which is not counted as material

Fiat 900 (DT) and VALMET 702 S (A), field by field
Field900 (DT)702 S (A)Gap
Engine
Engine power, claimed claimed88.8 hp89.7 hp
Engine declaredFIAT-IVECO 8065.01.000VALMET 411 BSdiffers
Displacement declared4.68 L4.18 L+12% 900 (DT)
Maximum torque declared203 lb·ft · 275 N·m235 lb·ft · 319 N·m+16% 702 S (A)
Transmission
Top speed declared15.5 mph · 25 km/h18.6 mph · 30 km/h+20% 702 S (A)
Clutch declaredDry Ferodo double clutch with separate PTO clutch
Hydraulics & hitch
Pump flow declared11.5 gpm · 43.5 L/min
Pressure declared2,901 psi · 200 bar
Three-point lift at ends declared4,982 lb · 2,260 kg5,456 lb · 2,475 kg+10% 702 S (A)
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared7,363 lb · 3,340 kg7,551 lb · 3,425 kg
Wheelbase declared97.6 in · 2,480 mm88.2 in · 2,240 mm+11% 900 (DT)
Length declared164.2 in · 4,170 mm150.4 in · 3,820 mm+9% 900 (DT)
Width declared78.7 in · 1,998 mm73.6 in · 1,869 mm+7% 900 (DT)
Height declared93.1 in · 2,365 mm99.0 in · 2,515 mm+6% 702 S (A)
Ground clearance declared17.4 in · 442 mm17.7 in · 450 mm
Turning radius, braked declared12.5 ft · 3.81 m12.4 ft · 3.79 m
Fuel tank declared122.6 qt · 116.0 L71.9 qt · 68.0 L+71% 900 (DT)

Fiat 900 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 900/900 DT”

VALMET 702 S (A) sources

Source
  • Source: Traktorenlexikon, “Valmet 702 S”