1 material differences · fewer than 12

Tractor oneFiat 900 (DT)1969–1972No measured PTO figureTractor twoSOMECA 900 (TD)1968–1971No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their power is identical, with the same weight or the same engine, which usually means one machine sold under two names; any difference below comes from how each source describes it. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

1 material differences · 16 fields identical or within 5%, which is not counted as material

Fiat 900 (DT) and SOMECA 900 (TD), field by field
Field900 (DT)900 (TD)Gap
Engine
Engine power, claimed claimed88.8 hp88.8 hp—
Engine declaredFIAT-IVECO 8065.01.000FIAT 8065.01.000differs
Displacement declared4.68 L4.68 L—
Maximum torque declared203 lb·ft · 275 N·m203 lb·ft · 275 N·m—
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Clutch declaredDry Ferodo double clutch with separate PTO clutch——
Hydraulics & hitch
Pump flow declared11.5 gpm · 43.5 L/min11.5 gpm · 43.5 L/min—
Pressure declared2,901 psi · 200 bar2,843 psi · 196 bar—
Three-point lift, at the coupling ends declared4,982 lb · 2,260 kg4,982 lb · 2,260 kg—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared7,363 lb · 3,340 kg7,363 lb · 3,340 kg—
Wheelbase declared97.6 in · 2,480 mm97.6 in · 2,480 mm—
Length declared164.2 in · 4,170 mm164.2 in · 4,170 mm—
Width declared78.7–99.7 in · 1,998–2,532 mm78.7–99.7 in · 1,998–2,532 mm—
Height, over the exhaust declared93.1 in · 2,365 mm93.1 in · 2,365 mm—
Ground clearance declared17.4 in · 442 mm17.4 in · 442 mm—
Turning radius, braked declared12.5 ft · 3.81 m12.5 ft · 3.81 m—
Fuel tank declared122.6 qt · 116.0 L122.6 qt · 116.0 L—

Fiat 900 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 900/900 DT”

SOMECA 900 (TD) sources

Source
  • Source: Traktorenlexikon, “Someca 900”