Fiat 880 (DT) or Steyr 980?

Which should you choose?

On performance, every comparable figure that differs favours the Steyr 980: three-point lift. It is also ahead on top speed.

  • The Steyr 980 suits loader and hydraulic implement work better on this data: 82% (1,710 kg / 3,770 lb) more three-point lift.
  • The Steyr 980 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 880 (DT) and Steyr 980, with the call on each
Question880 (DT)980Call
Which puts more power through the PTO shaft?53.9 kW (72.3 hp)Traktorenlexikon, “Fiat 880/880 DT”54.9 kW (73.6 hp)Traktorenlexikon, “Steyr 980”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 880 (DT) and the 980.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 880 (DT) and the 980.
Which pumps more oil for implements?—36.0 L/min (9.5 gpm)Traktorenlexikon, “Steyr 980”No figureNo call on hydraulic flow: no figure on record for the 880 (DT).
Which lifts more on the three-point hitch?2,090.000 kg (4,608 lb)Traktorenlexikon, “Fiat 880/880 DT”3,800 kg (8,378 lb)Traktorenlexikon, “Steyr 980”AheadThe Steyr 980 has 82% more lift (1,710 kg / 3,770 lb) than the Fiat 880 (DT) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,885 kg (8,565 lb)Traktorenlexikon, “Fiat 880/880 DT”3,130 kg (6,900 lb)Traktorenlexikon, “Steyr 980”Ahead (a fact, not an advantage)The Fiat 880 (DT) is 24% heavier (755 kg / 1,664 lb) than the Steyr 980 (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,850 kg (12,897 lb)Traktorenlexikon, “Fiat 880/880 DT”—No figureNo call on maximum permissible mass: no figure on record for the 980.
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Fiat 880/880 DT”12Traktorenlexikon, “Steyr 980”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 880 (DT) and the 980.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Fiat 880/880 DT”30 km/h (18.6 mph)Traktorenlexikon, “Steyr 980”AheadThe Steyr 980 has 20% more top speed (5.0 km/h / 3.1 mph) than the Fiat 880 (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 880/880 DT”540/1000 rpmTraktorenlexikon, “Steyr 980”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—liveTraktorenlexikon, “Steyr 980”No figureNo call on PTO independence: not stated for the 880 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 880/880 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Steyr 980”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1975–19801974–1977EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr 980 has 82% more lift (1,710 kg / 3,770 lb) than the Fiat 880 (DT) (both lift at the hitch ends, as stated by the source).
  • The Fiat 880 (DT) is 24% heavier (755 kg / 1,664 lb) than the Steyr 980 (both unladen weight, as stated by the source).
  • The Steyr 980 has 20% more top speed (5.0 km/h / 3.1 mph) than the Fiat 880 (DT) (both top speed forward, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources