Fiat 880 (DT) or SOMECA 880 (TD)?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 880 (DT) and SOMECA 880 (TD), with the call on each
Question880 (DT)880 (TD)Call
Which puts more power through the PTO shaft?53.9 kW (72.3 hp)Traktorenlexikon, “Fiat 880/880 DT”53.9 kW (72.3 hp)Traktorenlexikon, “Someca 880”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 880 (DT) and the 880 (TD).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 880 (DT) and the 880 (TD).
Which pumps more oil for implements?—27.0 L/min (7.1 gpm)Traktorenlexikon, “Someca 880”No figureNo call on hydraulic flow: no figure on record for the 880 (DT).
Which lifts more on the three-point hitch?2,090.000 kg (4,608 lb)Traktorenlexikon, “Fiat 880/880 DT”2,090 kg (4,608 lb)Traktorenlexikon, “Someca 880”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,885 kg (8,565 lb)Traktorenlexikon, “Fiat 880/880 DT”2,945 kg (6,493 lb)Traktorenlexikon, “Someca 880”Ahead (a fact, not an advantage)The Fiat 880 (DT) is 32% heavier (940 kg / 2,072 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,850 kg (12,897 lb)Traktorenlexikon, “Fiat 880/880 DT”5,850 kg (12,897 lb)Traktorenlexikon, “Someca 880”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Fiat 880/880 DT”8 to 16Traktorenlexikon, “Someca 880”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 880 (DT) and the 880 (TD).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Fiat 880/880 DT”25 km/h (15.5 mph)Traktorenlexikon, “Someca 880”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 880/880 DT”540/1000 rpmTraktorenlexikon, “Someca 880”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Someca 880”No figureNo call on PTO independence: not stated for the 880 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 880/880 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 880”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1975–19801975–1980EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 880 (DT) is 32% heavier (940 kg / 2,072 lb) than the SOMECA 880 (TD) (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources