Fiat 880 (DT) or Massey Ferguson MF 194 (A)?

Which should you choose?

On performance, every comparable figure that differs favours the Fiat 880 (DT): three-point lift.

  • The Fiat 880 (DT) suits loader and hydraulic implement work better on this data: 11% (215 kg / 474 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Fiat 880 (DT) and Massey Ferguson MF 194 (A), with the call on each
Question880 (DT)MF 194 (A)Call
Which puts more power through the PTO shaft?53.9 kW (72.3 hp)Traktorenlexikon, “Fiat 880/880 DT”53.3 kW (71.5 hp)Traktorenlexikon, “Massey Ferguson MF 194”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 880 (DT) and the MF 194 (A).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 880 (DT) and the MF 194 (A).
Which pumps more oil for implements?—26.7 L/min (7.1 gpm)Traktorenlexikon, “Massey Ferguson MF 194”No figureNo call on hydraulic flow: no figure on record for the 880 (DT).
Which lifts more on the three-point hitch?2,090.000 kg (4,608 lb)Traktorenlexikon, “Fiat 880/880 DT”1,875 kg (4,134 lb)Traktorenlexikon, “Massey Ferguson MF 194”AheadThe Fiat 880 (DT) has 11% more lift (215 kg / 474 lb) than the Massey Ferguson 194 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,885 kg (8,565 lb)Traktorenlexikon, “Fiat 880/880 DT”2,700 kg (5,952 lb)Traktorenlexikon, “Massey Ferguson MF 194”Ahead (a fact, not an advantage)The Fiat 880 (DT) is 44% heavier (1,185 kg / 2,612 lb) than the Massey Ferguson 194 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,850 kg (12,897 lb)Traktorenlexikon, “Fiat 880/880 DT”—No figureNo call on maximum permissible mass: no figure on record for the MF 194 (A).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Fiat 880/880 DT”12Traktorenlexikon, “Massey Ferguson MF 194”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 880 (DT) and the MF 194 (A).
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Fiat 880/880 DT”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 194”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiat 880/880 DT”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 194”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Massey Ferguson MF 194”No figureNo call on PTO independence: not stated for the 880 (DT).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 880/880 DT”Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 194”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1975–19801980–1983Ahead (a fact, not an advantage)The Massey Ferguson 194 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Fiat 880 (DT) has 11% more lift (215 kg / 474 lb) than the Massey Ferguson 194 (A) (both lift at the hitch ends, as stated by the source).
  • The Fiat 880 (DT) is 44% heavier (1,185 kg / 2,612 lb) than the Massey Ferguson 194 (A) (both unladen weight, as stated by the source).
  • The Massey Ferguson 194 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources