6 material differences · fewer than 12

Tractor oneFiat 880 (DT)1975–1980No measured PTO figureTractor twoInternational Harvester 7561967–1971No measured PTO figure

Which should you choose?

Read our verdict on the 880 (DT) and the 756 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 880 (DT) and International Harvester 756, field by field
Field880 (DT)756Gap
Engine
Engine power, claimed claimed86.9 hp75.0 hp+16% 880 (DT)
Engine declaredO.M.-FIAT CO-3/75——
Displacement declared4.56 L——
Transmission
Top speed declared15.5 mph · 25 km/h18.6 mph · 30 km/h+20% 756
Clutch declaredDry Ferodo or LuK double clutch——
Hydraulics & hitch
Pump flow declared—12.0 gpm · 45.5 L/min—
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared8,565 lb · 3,885 kg8,285 lb · 3,758 kg—
Maximum permissible mass declared12,897 lb · 5,850 kg——
Wheelbase declared96.5 in · 2,450 mm87.0 in · 2,210 mm+11% 880 (DT)
Length declared158.3 in · 4,020 mm157.0 in · 3,988 mm—
Width declared78.0 in · 1,980 mm92.0 in · 2,337 mm+18% 756
Ground clearance declared21.7 in · 550 mm17.0 in · 432 mm+27% 880 (DT)
Turning radius, braked declared12.4 ft · 3.79 m10.7 ft · 3.25 m+17% 880 (DT)
Fuel tank declared112.0 qt · 106.0 L132.1 qt · 125.0 L+18% 756

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 880 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 880/880 DT”

International Harvester 756 sources

Source
  • Source: Traktorenlexikon, “IHC 756”