Fiat 880-5 (DT) vs Steyr 8110 (a)
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the 880-5 (DT) and the 8110 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | 880-5 (DT) | 8110 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 86.9 hp | 88.8 hp | — |
| Engine declared | FIAT-IVECO 8055.04.200 | Steyr WD-611.43 | differs |
| Displacement declared | 4.58 L | 5.18 L | +13% 8110 (a) |
| Maximum torque declared | 218 lb·ft · 296 N·m | 238 lb·ft · 323 N·m | +9% 8110 (a) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry FERODO or LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.9 gpm · 41.4 L/min | — | — |
| Pressure declared | 3,263 psi · 225 bar | 3,553 psi · 245 bar | +9% 8110 (a) |
| Three-point lift at ends declared | 6,261 lb · 2,840 kg | 10,582 lb · 4,800 kg | +69% 8110 (a) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,157 lb · 3,700 kg | 8,576 lb · 3,890 kg | — |
| Wheelbase declared | 96.5 in · 2,451 mm | 98.8 in · 2,509 mm | — |
| Length declared | 144.5 in · 3,670 mm | 163.4 in · 4,150 mm | +13% 8110 (a) |
| Width declared | 77.6 in · 1,970 mm | 76.4 in · 1,940 mm | — |
| Height declared | 100.8 in · 2,560 mm | 103.4 in · 2,626 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | — | — |
| Turning radius, braked declared | 11.8 ft · 3.60 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 122.6 qt · 116.0 L | 128.9 qt · 122.0 L | — |
Fiat 880-5 (DT) sources
Source
- Source: Traktorenlexikon, “Fiat 880 DT 5”
Steyr 8110 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 8110”