Fiat 880-5 (DT) vs Massey Ferguson MF 1085

12 material differences

Tractor one

1980–1984

No measured PTO figure

Tractor two

1973–1978

No measured PTO figure

Which should you choose?

Read our verdict on the 880-5 (DT) and the MF 1085 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

Fiat 880-5 (DT) and Massey Ferguson MF 1085, field by field
Field	880-5 (DT)	MF 1085	Gap
Engine
Engine power, claimed claimed	86.9 hp	86.8 hp	—
Engine declared	FIAT-IVECO 8055.04.200	Perkins A 4.318	differs
Displacement declared	4.58 L	5.21 L	+14% MF 1085
Maximum torque declared	218 lb·ft · 296 N·m	256 lb·ft · 347 N·m	+17% MF 1085
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	15.5 mph · 25 km/h	differs
Clutch declared	Dry FERODO or LuK double clutch	Pedal-operated dry LUK single-plate clutch with 305 mm diameter	differs
Hydraulics & hitch
Pump flow declared	10.9 gpm · 41.4 L/min	7.0 gpm · 26.5 L/min	+56% 880-5 (DT)
Pressure declared	3,263 psi · 225 bar	3,086 psi · 213 bar	+6% 880-5 (DT)
Three-point lift at ends declared	6,261 lb · 2,840 kg	6,173 lb · 2,800 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,157 lb · 3,700 kg	8,490 lb · 3,851 kg	—
Maximum permissible mass declared	—	13,228 lb · 6,000 kg	—
Wheelbase declared	96.5 in · 2,451 mm	97.2 in · 2,470 mm	—
Length declared	144.5 in · 3,670 mm	153.9 in · 3,910 mm	+7% MF 1085
Width declared	77.6 in · 1,970 mm	114.2 in · 2,900 mm	+47% MF 1085
Height declared	100.8 in · 2,560 mm	79.1 in · 2,010 mm	+27% 880-5 (DT)
Ground clearance declared	20.9 in · 530 mm	16.5 in · 420 mm	+26% 880-5 (DT)
Turning radius, braked declared	11.8 ft · 3.60 m	—	—
Fuel tank declared	122.6 qt · 116.0 L	179.6 qt · 170.0 L	+47% MF 1085

Source

Source