Fiat 880-5 (DT) or Lamborghini R-1106 (DT)?
Which should you choose?
On performance, every comparable figure that differs favours the Lamborghini R-1106 (DT): hydraulic flow and three-point lift.
- The Lamborghini R-1106 (DT) suits loader and hydraulic implement work better on this data: 74% (30.6 L/min / 8.1 gpm) more hydraulic flow and 62% (1,760 kg / 3,880 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 880-5 (DT) | R-1106 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 60.4 kW (81.0 hp)Traktorenlexikon, “Fiat 880 DT 5” | 59.9 kW (80.3 hp)Traktorenlexikon, “Lamborghini 1106 DT” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 880-5 (DT) and the R-1106 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 880-5 (DT) and the R-1106 (DT). |
| Which pumps more oil for implements? | 41.4 L/min (10.9 gpm)Traktorenlexikon, “Fiat 880 DT 5” | 72.0 L/min (19.0 gpm)Traktorenlexikon, “Lamborghini 1106 DT” | AheadThe Lamborghini R-1106 (DT) has 74% more hydraulic flow (30.6 L/min / 8.1 gpm) than the Fiat 880-5 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,840 kg (6,261 lb)Traktorenlexikon, “Fiat 880 DT 5” | 4,600 kg (10,141 lb)Traktorenlexikon, “Lamborghini 1106 DT” | AheadThe Lamborghini R-1106 (DT) has 62% more lift (1,760 kg / 3,880 lb) than the Fiat 880-5 (DT) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,700 kg (8,157 lb)Traktorenlexikon, “Fiat 880 DT 5” | 4,140 kg (9,127 lb)Traktorenlexikon, “Lamborghini 1106 DT” | Ahead (a fact, not an advantage)The Lamborghini R-1106 (DT) is 12% heavier (440 kg / 970 lb) than the Fiat 880-5 (DT) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 880-5 (DT) and the R-1106 (DT). |
| Which has the wider choice of gears? | 12 to 16Traktorenlexikon, “Fiat 880 DT 5” | 12 to 24Traktorenlexikon, “Lamborghini 1106 DT” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 880-5 (DT) and the R-1106 (DT). |
| Which is faster on the road? | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Fiat 880 DT 5” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Lamborghini 1106 DT” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiat 880 DT 5” | 540/1000 rpmTraktorenlexikon, “Lamborghini 1106 DT” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiat 880 DT 5” | independentTraktorenlexikon, “Lamborghini 1106 DT” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Fiat 880 DT 5” | Two-wheel or four-wheel driveTraktorenlexikon, “Lamborghini 1106 DT” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1980–1984 | 1985–1996 | Ahead (a fact, not an advantage)The Lamborghini R-1106 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Lamborghini R-1106 (DT) has 74% more hydraulic flow (30.6 L/min / 8.1 gpm) than the Fiat 880-5 (DT) (both pump flow, as stated by the source).
- The Lamborghini R-1106 (DT) has 62% more lift (1,760 kg / 3,880 lb) than the Fiat 880-5 (DT) (both lift at the hitch ends, as stated by the source).
- The Lamborghini R-1106 (DT) is 12% heavier (440 kg / 970 lb) than the Fiat 880-5 (DT) (both unladen weight, as stated by the source).
- The Lamborghini R-1106 (DT) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources